I want a local model that I talk to, and that delegates work to whatever model it deems adequate, simplifying and perhaps even anonymizing the prompts/data as it goes.
> I've never had an issue with Codex or Claude reading massive files
Reading files isn't a problem they want to solve. The idea seems to be using a cheaper model to "scout" for the intended code, instead of an expensive one that reads all the things (and spends more tokens / thinks about them).
I think this might be useful because Opus 5 especially tends to over-read. So this looks like an "LLM Bloom filter", telling "hey this is the code you might want to read".
> So this is just delegating certain work to dumber models? I certainly wouldn't use Gemini 2.5 Flash (!!?) for code writing as suggested.
Why not, though? I started using OpenCode + GitHub Copilot, but I burned through my Claude Sonnet quota in just three days. I switched to GPT-5.4-mini, which uses far fewer tokens, and it’s often just as good as Sonnet. I think optimizing token usage is a good exercise. We often assume a model will be terrible, when it really isn’t.
> and it’s often just as good as Sonnet. I think optimizing token usage is a good exercise. We often assume a model will be terrible, when it really isn’t.
“Often” doesn’t sound great. If the smaller model fails then I just wasted a lot of time and tokens.
It cuts token usage because they are using a different service with a different token budget for the reader/code writer tasks.
You can also just delegate this to subagents with Claude Code (though you have a more limited choice of models unless you swap the cheaper models via OpenRouter).
I'm OK using a dumb model as a smart grep, but the whole point of using the frontier models is using their intelligence for the hard stuff like coding.
I’m currently on codex can it also this? I find it hard to make accurate benchmarks in token use for these kind of changes because I don’t keep repeating the same tasks.
Basically I run in luna high or extra high continuously with a terra subworker dedicated to planning and difficult research questions. Then I end with a final review in Terra or Sol depending how big the feature is.
There are a bunch of approaches that do this kind of thing to reduce token usage ("semble" came to mind, technically different but functionally similar) but their performance is usually mixed because the models haven't been RL tuned to use them as they have the default tool suite. Combine that with the incentive by Anthropic et al. to make you actually burn through as many tokens as possible and I don't see these kind of things becoming mainstream yet. Maybe once we reach a point where consumers actually care about cost (because LLMs have become commoditized) these cost-reduction approaches become relevant enough to actually finetune the model with them.
Try it yourself, use a big model like Opus or Sol to implement everything by first making a plan using plan mode.
Then try distributing the task to a cheaper models like Luna Max or Gemini Flash 3.8.
During planning, the big model already reads the relevant files in context, while giving a smaller model a slice of work itself requires the big model to reason about the task distribution, review, etc.
When I've tried it using API-rate billing I've saved on $$ on the tasks where I split planning+execution into Sol+Terra or Terra+Luna even. I wasn't paying attention to the token count, I was paying attention to the spend.
>Tested against a Java monorepo across four scenarios, measuring tokens Claude would consume reading files directly vs. consuming the bulk-reader's summary or writing code via the code-writer. Mean bulk-read savings were around a whopping 90%.
>The code-write scenario is harder to measure in tokens because without shunt, Claude both reads the reference files and generates the output as expensive output tokens. With shunt, the code goes straight to disk, Claude never sees it.
So nothing about accuracy or actual performance? At least run against DeepSWE bench or something.
> The worker model found surface-level patterns but missed a subtle thread-safety bug in my testing. Claude spotted it in seconds once given the right context.
So the actual performance was bad.
It might be an acceptable trade off tho. If token costs become prohibitive, then using a meat engineer to actually debug could be cheaper.
Isn't this a somewhat standard multi-model setup? there's nothing ground breaking here, just delegate claude to plan -> smaller model for implementation.
Very standard in all coding harnesses/models I've worked with, with the bonus that everything listed in the "What doesn't work in Portal by Spotify" section still works. I've been watching Opus spin off work to Fable and Sonnet as appropriate all day.
Do you have specific instructions that cause this or did it come out of the box? Is it also when using normal prompting or only when you set a goal?
In codex I don’t see this behaviour despite having added the instructions to do so to my agents file. I also let that agents file be reviewed by Sol to come up with the right phrasing but no luck so far.
Here is another technique to save tokens: allow the model to read a skeleton of the source code before reading the code, to give it an index into the code so it can read targeted chunks.
There is a tool that uses ripgrep and treesitter that does this [1], adapted from the maki coding agent.
I sometimes get jumpscaped at the thought of older or less proven models used in enterprise settings. I understand the devex ergonomics argument; I'm not a fan of profiles concepts typically if trodding into delegation.
If you want an expensive model to reason on your files, you need to give them your files.
If you think a cheap model is smart enough to filter information to give to your expensive model, you can save some money. If you think your cheap model is smart enough to format your expensive output, you can save some money.
In practice, this didn't work well until Qwen 3.8.
Qwen 3.6 and (abliterated) Gemma 4 were almost there but still making mistakes.
I could only read one sentence, then skipped to another paragraph. Sure enough the scroll bar revealed a suspiciously long article. No human would ever write this much bland bullshit.
Why do people write like LLMs? Maybe they delegate all the work to a LLM and don't have the time or the will to edit the copy. How about telling another LLMs to replace at least the most common LLM patterns with something human looking?
I don't feel like this was a piece by someone who has used LLMs too much.
I'm fairly confident this is just LLM writing the majority, possibly tweaked by a human.
Opening line is a form of, "It's not X, it's Y": ".. isn't thinking. It's I/O".
Then the start of the second paragraph is that weird breathless kind of writing:
> Reading five files to answer a question about one method. Generating a test file that follows the exact same pattern as the twenty test files next to it.
More "It's not X, it's Y": The seat license isn't what hurts, it's the tokens.
The softly pressed insistence that AI is worth it, really: "The tooling pays for itself but only if..."
Smooth as butter with Firefox on Android. As for why scrolljacking is "allowed", web devs will always find new ways to do annoying things and work around browser constraints.
It takes true corporate dedication to publish technical thought leadership on a page that actively fights your ability to read it.
I want a local model that I talk to, and that delegates work to whatever model it deems adequate, simplifying and perhaps even anonymizing the prompts/data as it goes.
So this is just delegating certain work to dumber models? I certainly wouldn't use Gemini 2.5 Flash (!!?) for code writing as suggested.
I've never had an issue with Codex or Claude reading massive files, they're really good at precise greps.
Yes, this makes little sense. It looks like it's a way to avoid having Claude read or write your code.
And why stop at 90%? I have this one weird trick to reduce Claude Code token use by 100%: use a different harness and model!
This does seem to just be a subagents implementation.
> I've never had an issue with Codex or Claude reading massive files
Reading files isn't a problem they want to solve. The idea seems to be using a cheaper model to "scout" for the intended code, instead of an expensive one that reads all the things (and spends more tokens / thinks about them).
I think this might be useful because Opus 5 especially tends to over-read. So this looks like an "LLM Bloom filter", telling "hey this is the code you might want to read".
> "LLM Bloom filter"
very good way to put it.
Pretty sure claude code already delegates reading a large codebase to haiku subagents.
As of July, the explore agent inherits the parent model, capped at opus.
So fable and opus use opus to explore. Sonnet uses sonnet.
I replaced my built in explore agent with one hardcoded to sonnet low effort.
https://github.com/anthropics/claude-code/issues/72940
It did used to use Haiku but that model is now too too far behind…
This sounds exactly like what Repoprompt was built for: https://repoprompt.com/
The community edition was open sourced when the creator got hired by OpenAI a few months ago.
> So this is just delegating certain work to dumber models? I certainly wouldn't use Gemini 2.5 Flash (!!?) for code writing as suggested.
Why not, though? I started using OpenCode + GitHub Copilot, but I burned through my Claude Sonnet quota in just three days. I switched to GPT-5.4-mini, which uses far fewer tokens, and it’s often just as good as Sonnet. I think optimizing token usage is a good exercise. We often assume a model will be terrible, when it really isn’t.
> and it’s often just as good as Sonnet. I think optimizing token usage is a good exercise. We often assume a model will be terrible, when it really isn’t.
“Often” doesn’t sound great. If the smaller model fails then I just wasted a lot of time and tokens.
My code being correct 99% of the and costing 5x more tokens is vastly preferable to my code only being correct 90% of the time and using fewer tokens.
Thank you, the article was so verbose I couldn't get the point just by skimming it. And it was this simple...
I wish websites would stop messing with the scrolling behavior.
It cuts token usage because they are using a different service with a different token budget for the reader/code writer tasks.
You can also just delegate this to subagents with Claude Code (though you have a more limited choice of models unless you swap the cheaper models via OpenRouter).
I'm OK using a dumb model as a smart grep, but the whole point of using the frontier models is using their intelligence for the hard stuff like coding.
You can also use hooks to force the use of subagents for this. The stack here is entirely unnecessary
I’m currently on codex can it also this? I find it hard to make accurate benchmarks in token use for these kind of changes because I don’t keep repeating the same tasks.
Basically I run in luna high or extra high continuously with a terra subworker dedicated to planning and difficult research questions. Then I end with a final review in Terra or Sol depending how big the feature is.
There are a bunch of approaches that do this kind of thing to reduce token usage ("semble" came to mind, technically different but functionally similar) but their performance is usually mixed because the models haven't been RL tuned to use them as they have the default tool suite. Combine that with the incentive by Anthropic et al. to make you actually burn through as many tokens as possible and I don't see these kind of things becoming mainstream yet. Maybe once we reach a point where consumers actually care about cost (because LLMs have become commoditized) these cost-reduction approaches become relevant enough to actually finetune the model with them.
It doesn't work well in practice.
Try it yourself, use a big model like Opus or Sol to implement everything by first making a plan using plan mode.
Then try distributing the task to a cheaper models like Luna Max or Gemini Flash 3.8.
During planning, the big model already reads the relevant files in context, while giving a smaller model a slice of work itself requires the big model to reason about the task distribution, review, etc.
So do you really save on tokens?
Maybe not, but I like to review the plan anyway so that I'm less surprised by what it actually did.
> Try it yourself, use a big model like Opus or Sol to implement everything by first making a plan using plan mode.
When I do this, I can have it use cheap subagents with models like Luna to read the relevant files.
Do you have the cheap models summarize the files? How do they get the relevant information to the bigger models?
When I've tried it using API-rate billing I've saved on $$ on the tasks where I split planning+execution into Sol+Terra or Terra+Luna even. I wasn't paying attention to the token count, I was paying attention to the spend.
Side note: PLEASE DONT hijack scroll. Its just a bad bad thing to do. Please dont.
Oh dear, why does this website override scrolling behavior?
glad im not the only one that enabled screen reader mode to scan the article for some goodies
My first thought too! I couldn't put up with it. Left quickly.
>The benchmarks
>Tested against a Java monorepo across four scenarios, measuring tokens Claude would consume reading files directly vs. consuming the bulk-reader's summary or writing code via the code-writer. Mean bulk-read savings were around a whopping 90%.
>The code-write scenario is harder to measure in tokens because without shunt, Claude both reads the reference files and generates the output as expensive output tokens. With shunt, the code goes straight to disk, Claude never sees it.
So nothing about accuracy or actual performance? At least run against DeepSWE bench or something.
> The worker model found surface-level patterns but missed a subtle thread-safety bug in my testing. Claude spotted it in seconds once given the right context.
So the actual performance was bad.
It might be an acceptable trade off tho. If token costs become prohibitive, then using a meat engineer to actually debug could be cheaper.
Isn't this already done in harnesses? I mean I see Terra or Sol uing Luna all the time for tasks when using copilot.
Is not something already addressed by mcps like codegraph? https://github.com/CodeGraphContext/CodeGraphContext (without the need of extra third party api/costs)
Isn't this a somewhat standard multi-model setup? there's nothing ground breaking here, just delegate claude to plan -> smaller model for implementation.
Very standard in all coding harnesses/models I've worked with, with the bonus that everything listed in the "What doesn't work in Portal by Spotify" section still works. I've been watching Opus spin off work to Fable and Sonnet as appropriate all day.
Can you name some harnesses?
Do you have specific instructions that cause this or did it come out of the box? Is it also when using normal prompting or only when you set a goal?
In codex I don’t see this behaviour despite having added the instructions to do so to my agents file. I also let that agents file be reviewed by Sol to come up with the right phrasing but no luck so far.
Here is another technique to save tokens: allow the model to read a skeleton of the source code before reading the code, to give it an index into the code so it can read targeted chunks.
There is a tool that uses ripgrep and treesitter that does this [1], adapted from the maki coding agent.
[1]: https://github.com/ninjaxtools/treesitter-index
Aider pioneered this with the "repo map" which works tremendously well.
Yep, there's also prewalk.
I sometimes get jumpscaped at the thought of older or less proven models used in enterprise settings. I understand the devex ergonomics argument; I'm not a fan of profiles concepts typically if trodding into delegation.
If you want an expensive model to reason on your files, you need to give them your files.
If you think a cheap model is smart enough to filter information to give to your expensive model, you can save some money. If you think your cheap model is smart enough to format your expensive output, you can save some money.
In practice, this didn't work well until Qwen 3.8.
Qwen 3.6 and (abliterated) Gemma 4 were almost there but still making mistakes.
codegraph + context mode are all I need.
I cut my Claude Code token usage by 100% by writing the code myself.
Dang, not even Spotify care enough to not write AI slop articles.
We’re fucked.
To be fair, Spotify was a slop factory long before LLMs started doing it
They are in the business of selling audio slop streams, why are you surprised?
True
I could only read one sentence, then skipped to another paragraph. Sure enough the scroll bar revealed a suspiciously long article. No human would ever write this much bland bullshit.
Next sentence was also an AI juxtaposition. Done.
Yeah, stopped reading after the first paragraph. It's really so disrespectful to your audience.
It‘s someone from R&D probably not so official
Spotify? The company pushing AI “music” into people’s feeds to save money on royalties? That Spotify?
I noticed
> The modes are the load-bearing piece:
Why do people write like LLMs? Maybe they delegate all the work to a LLM and don't have the time or the will to edit the copy. How about telling another LLMs to replace at least the most common LLM patterns with something human looking?
I don't feel like this was a piece by someone who has used LLMs too much.
I'm fairly confident this is just LLM writing the majority, possibly tweaked by a human.
Opening line is a form of, "It's not X, it's Y": ".. isn't thinking. It's I/O".
Then the start of the second paragraph is that weird breathless kind of writing:
> Reading five files to answer a question about one method. Generating a test file that follows the exact same pattern as the twenty test files next to it.
More "It's not X, it's Y": The seat license isn't what hurts, it's the tokens.
The softly pressed insistence that AI is worth it, really: "The tooling pays for itself but only if..."
They should use their portal to de-claude the writing.
This is just offshoring but for models
Not only does this study not control for quality of output, it doesn't even show a cost reduction. Its a very low signal article.
STOP hijacking my scroll. I don't know why chrome even allow such behavior?
And, I can't believe this is from official spotify.... What a joke.
Smooth as butter with Firefox on Android. As for why scrolljacking is "allowed", web devs will always find new ways to do annoying things and work around browser constraints.
I confirm that. Then I opened the page in Chrome on Android and it scrolls nicely there too. So maybe they broke only desktop browsers.
I swear. Put me off so bad I didn't even bother reading the rest of the article. It's even more infuriating that this is by a company this big