> Where the West built home computers around 8-bit chips ...
Mostly, but don't forget "The Heathkit H11 Computer is an early kit-format personal computer introduced in 1978. It is essentially a Digital Equipment PDP-11 in a small-form-factor case, designed by Heathkit."
"Processor – LSI-11 (KD11-HA half-size or "double-height" card)"
The CPU was 16-bit but the video and sound and I/O chips were all 8-bit and most of the RAM was connected via the video chip so it was probably also only 8-bit. It did have a small amount of RAM on the CPU so that may have been 16-bit. Was the BASIC 16-bit or was it 8-bit with simulated 16 and 32-bit numbers like Microsoft BASIC was?
One correction - it does not use a clone of PDP-11 CPU, it uses a CPU that was redone to be compatible with PDP-11 including the QBUS - the CPU design was completely original and planned for a different instruction set, but an order came for PDP-11 compatibility
I had experience of working on one in university. That was the only machine that I could program right in machine codes, it was logical and beautiful, unlike those ugly Intel codes.
Oh hey my first computer. Loading programs into it from tape deck, kind of noise that later will be associated with modems. Thr membrane keyboard (think gas station buttons) was very bad indeed, especially once thr common buttons got wear. But I sure had fun being 10 years old and learning programming on it.
General Instruments had the CP1600 [1] which was also a PDP-11ish architecture. Data General had a microNOVA based on their own mini architecture. It wasn't unusual to translate existing architectures to a microprocessor design in the 70s. The soviets being behind the curve wasn't unusual either.
Cloning is easy. The DDR has been revealed to commit industrial espionage on a vast scale.
But you need manufacturing capacity and for that you needed vast Western financial investment. Which is why Xiaoping humiliated himself with wearing a cowboy hat on his state visit to America.
> The keyboard uses mechanical microswitches under a flexible membrane overlay rather than real keycaps
I don't think that's true? When I was six, my father brought a BK0010 home, its keyboard was only partly functional, and he's spent an evening deoxidising the contacts on the PCB and covering them with solder. I don't remember seeing any microswitches. Which was the biggest gripe with this keyboard, apart from tiny travel: the contacts would stop working after a while.
Don't forget the Elektronika MK-85, basically a real handheld PDP-11 workalike you can even program in assembly with a hack. Looks like a PB-100/PC-4 ripoff, but it's not. https://www.oldcomputermuseum.com/elektronika_mk85.html
> Where the West built home computers around 8-bit chips ...
Mostly, but don't forget "The Heathkit H11 Computer is an early kit-format personal computer introduced in 1978. It is essentially a Digital Equipment PDP-11 in a small-form-factor case, designed by Heathkit." "Processor – LSI-11 (KD11-HA half-size or "double-height" card)"
quoted from https://en.wikipedia.org/wiki/Heathkit_H11
Not to mention the TI 99/4 in 1979.
The CPU was 16-bit but the video and sound and I/O chips were all 8-bit and most of the RAM was connected via the video chip so it was probably also only 8-bit. It did have a small amount of RAM on the CPU so that may have been 16-bit. Was the BASIC 16-bit or was it 8-bit with simulated 16 and 32-bit numbers like Microsoft BASIC was?
One correction - it does not use a clone of PDP-11 CPU, it uses a CPU that was redone to be compatible with PDP-11 including the QBUS - the CPU design was completely original and planned for a different instruction set, but an order came for PDP-11 compatibility
This whole page looks to be slop. Wrong in many places and ending abruptly instead of telling a story.
Sounds like an interesting story. Is it documented anywhere?
https://www.electronics.ru/journal/article/477
Love this series of machines, but that page is AI generated. Here's Wikipedia: https://en.wikipedia.org/wiki/Electronika_BK
A short series of videos on programming the UKNC/Elektronika MS-0511 https://www.youtube.com/playlist?list=PLp_QNRIYljFosVKGRrGD1... from KeithS alias ChibiAkumas alias Akuyou https://www.chibiakumas.com . (MS rather than BK, so IIUC this is a different Soviet-bloc PDP-11-compatible 1980s microcomputer.)
I had experience of working on one in university. That was the only machine that I could program right in machine codes, it was logical and beautiful, unlike those ugly Intel codes.
Oh hey my first computer. Loading programs into it from tape deck, kind of noise that later will be associated with modems. Thr membrane keyboard (think gas station buttons) was very bad indeed, especially once thr common buttons got wear. But I sure had fun being 10 years old and learning programming on it.
Lucky you. I was a teen in the 80s, and had to travel an hour and a half across the city to use an SM-1420 in a lab.
Yo, that's super legit! What was it like back then?
My first computer as well! The non-membrane keyboard was definitely an improvement, but boy, that squeaky bastard was a real workout for your fingers.
General Instruments had the CP1600 [1] which was also a PDP-11ish architecture. Data General had a microNOVA based on their own mini architecture. It wasn't unusual to translate existing architectures to a microprocessor design in the 70s. The soviets being behind the curve wasn't unusual either.
[1] https://en.wikipedia.org/wiki/General_Instrument_CP1600
Is it me or is the article LLM written (or heavily edited)?
Cloning is easy. The DDR has been revealed to commit industrial espionage on a vast scale.
But you need manufacturing capacity and for that you needed vast Western financial investment. Which is why Xiaoping humiliated himself with wearing a cowboy hat on his state visit to America.
> The keyboard uses mechanical microswitches under a flexible membrane overlay rather than real keycaps
I don't think that's true? When I was six, my father brought a BK0010 home, its keyboard was only partly functional, and he's spent an evening deoxidising the contacts on the PCB and covering them with solder. I don't remember seeing any microswitches. Which was the biggest gripe with this keyboard, apart from tiny travel: the contacts would stop working after a while.
Don't forget the Elektronika MK-85, basically a real handheld PDP-11 workalike you can even program in assembly with a hack. Looks like a PB-100/PC-4 ripoff, but it's not. https://www.oldcomputermuseum.com/elektronika_mk85.html